DESCRIPTION
The P3TV244300WP is a CCTV power supply and distribution
module in a NEMA 4X enclosure. It is designed with 4 individually fused outputs
for powering CCTV cameras and accessories. It will provide 24VAC via
distibution to 4 fused outputs with a total of 12.5 Amps continous supply
current.FEATURES
˙ UL LISTED NEMA 4X
Enclosure
˙ Input 115VAC 50/60 HZ 2.7
Amps
˙ 12.5 Amps 300VA supply
current
˙ Four 24VAC individually fused
outputs
˙ Output fuses are rated at 3
Amps
˙ Main fuse is rated at 15
Amps
˙ Surge protected outputs
˙ AC power LED indicator
˙ Individual LED’s for each
output
˙ Power ON/OFF switch
˙ Spare fuses included
˙ Unit maintains camera
synchronization
˙ Ease of installation saves time and
eliminates costly labor
INSTALLATION
INSTRUCTIONS
˙ See diagram below for suggested
cable entry.
˙ Mount the P3TV244300WP in desired
location and secure
˙ Slide switch to OFF
position
˙ Connect the AC 115VAC 50/60Hz to the
black and white flying leads of the transformer
˙ Connect the green to an earth
ground
˙ Connect each camera to terminals 1
to 4 marked 1 to 4 (+ & -)
˙ Slide switch to ON
position
˙ Green LED will illuminate when AC
power is present
˙ Red individual LED’s will light when
cameras or accessories are present and powered
˙ Upon completion of wiring secure
enclosure door with catch.
WARNINGS
To reduce the risk of electric
shock, do not expose this product to rain or moisture
For continuous protection against
hazard, replace only with same type and rating of fuse
