The P3TV248175WP is a CCTV power supply and distribution module in a NEMA 4X enclosure.  It is designed with 8 individually fused outputs for powering CCTV cameras and accessories.  It will provide 24VAC via distibution to 8 fused outputs with a total of 7.25 Amps continous supply current.

FEATURES_________________________________________________________________________

˙     UL LISTED NEMA 4X Enclosure

˙     Input 115VAC 50/60 HZ   1.75 Amps

˙     4 Amps 175VA supply current

˙     Eight 24VAC individually fused outputs

˙     Output fuses are rated at 3 Amps

˙     Main fuse is rated at 10 Amps

˙     Surge protected outputs

˙     AC power LED indicator

˙     Individual LED’s for each output

˙     Power ON/OFF switch

˙     Spare fuses included

˙     Unit maintains camera synchronization

˙     Ease of installation saves time and eliminates costly labor

INSTALLATION INSTRUCTIONS_______________________________________________________

˙       See diagram below for suggested cable entry.

˙       Mount the P3TV248175WP in desired location and secure

˙       Slide switch to OFF position

˙       Connect the AC 115VAC 50/60Hz to the black and white flying leads of the transformer Connect the green to an earth ground

˙       Connect each camera to terminals 1 to 8 marked 1 to 8 (+ & -)

˙       Slide switch to ON position

˙       Green LED will illuminate when AC power is present

˙       Red individual LED’s will light when cameras or accessories are present and powered

˙       Upon completion of wiring secure enclosure door with catch.

WARNINGS__________________________________________________________________________

To reduce the risk of electric shock, do not expose this product to rain or moisture

For continuous protection against hazard, replace only with same type and rating of fuse